MIPI I3C Electrical Validation

MIPI I3C is backward compatible with many Legacy I2C Devices, but I3C Devices also support higher speed (with SCL clock speed up to 12.5 MHz) and new communication modes. MIPI I3C modes include Single Data Rate (SDR) Mode, High Data Rate (HDR) Mode. HDR Mode is also divided into Dual Data Rate (HDR-DDR) Mode, Ternary Symbol Legacy (HDR-TSL) Mode, Ternary Symbol Pure-bus (HDR-TSP) Mode, and Bulk Transport (HDR-BT) Mode.

MIPI I3C Electrical Validation offers various electrical measurements compliance testing as specified in the MIPI I3C Specification (currently supports MIPI I3C version 1.1.1).

Supported Models:

TS3124V (4-channel DSO)	TS3000 Specifications PDF	MSO3124V (4-channel DSO + 16-channel LA)	MSO3000 Specifications PDF

Overview Report

Reference Point Dialog & Waveform:

HTML Report

I3C Electrical Validation Settings

1. General Settings: Channel sources, working voltage and speed

2. Decode / Trigger Settings:

3. Electrical Validation Parameter Settings: Frequency, Timing, Voltage limitation

This section includes 5 parameter tables, including

• Frequency
• I3C timing requirements when communicating with I2C Legacy Devices
• I3C Open Drain timing parameters
• I3C Push-Pull timing parameters
• I3C I/O stage characteristics voltage requirements

4. Software EV control panel:

Stop Conditions:
Stop when acquired X times
Stop when Result Fail > X times

Information:
Select waveform

Save File:
Save as Html
Save as .MOW (Software format)

YouTube Video

Electrical Validation Solution PDF

¿No encontraste lo que buscas? No dudes en comunicarte; ¡Es muy probable que tengamos una herramienta para ayudarte!