SPI Electrical Validation

Use an oscilloscope for SPI electrical validation to ensure compliance with defined specifications. After an extended burn-in test, the oscilloscope confirms that the electrical characteristics of the signal meet the required standards.

Supported Models:

TS3124V (4-channel DSO)	TS3000 Specifications PDF	MSO3124V (4-channel DSO + 16-channel LA)	MSO3000 Specifications PDF

Overview Report

SPI Electrical Validation Settings:

1. General Settings: Channel sources, working voltage and speed

2. Decode / Trigger Settings:

3. Electrical Validation Parameter Settings: Frequency, Timing, Voltage limitation

There are no standard measurement limits defined for SPI bus. Therefore, it is recommended to define your own limits while validate SPI signals. This section displays 3 characteristics table, including • Frequency • Timing parameters • Voltage requirements

4. Software EV control panel:

Stop Conditions: Stop when acquired X times Stop when Result Fail > X times Information: Select waveform Save File: Save as Html Save as .MOW (Software format)

YouTube Video

Electrical Validation Solution PDF