MIPI SPMI

MIPI SPMI (System Power Management Interface) is an interface standard developed by the MIPI Alliance, designed specifically for mobile phone power management systems. With the continuous improvement of the functionality of mobile phones and smart devices, the demand for power management becomes more complex. The primary goal of MIPI SPMI is to provide a unified standard, allowing various devices and components from different vendors, especially power-related components in mobile phones (such as batteries, charging circuits, power management ICs, etc.), to work together more effectively.

MIPI SPMI uses two main signal lines: SCLK (Serial Clock) and SDATA (Serial Data). It typically operates within the voltage range of 1.2V or 1.8V. This low-voltage operation helps reduce power consumption, meeting the requirements of mobile devices for efficient and energy-saving power management solutions.

Logic Analyzer / MSO

MSO2116B	MSO3124V (w/ electrical validation)
MSO2000 series Specifications PDF	MSO3000 series Specifications PDF

MIPI SPMI Decode 

Save as TXT/CSV In Logic Analyzer mode, click the icon above the report area to save the decoded data as a TXT/CSV file.

MIPI SPMI Electrical Validation

MIPI SPMI Electrical Validation offers various electrical measurements compliance testing as specified in the MIPI SPMI Specification.

Supported Models: TS3124V (4-channel DSO), MSO3124V (4-channel DSO + 16-channel LA)

Electrical Validation Solution PDF

MIPI SPMI Decoding Setup Steps 1. Click Quick Settings or Add Protocol Decode to select a protocol for logic analyzer capture. 2. Select MIPI SPMI for decoding. 3. If you use Quick Settings, the system will recommend configurations for trigger type, sampling rate, voltage threshold, and channel settings. 4. Click the icon to access the Decode Settings screen

Channel: Set the channels of SCLK and SDATA. Version: select v1.0 or v2.0