Protocol Analyzer is PC-based with USB 3.0 interface that makes it professional, reliable and cost-effective. Moreover, it acts as a Protocol logger as well as a Protocol Monitor. A very versatile tool.
Functions:
• Real-time data display, post-capture waveforms
• Trigger for commands or data
• Different active probes for different protocols for easier connections
• Filter data to save more commands
• Hide data for easy reading
• Search data for quick finding
• Statistics for commands and data
• Two voltage detects to find design bugs from voltage drop
• Use PC hard disk (SSD) to log long time data
• Protocol monitor like dash camera for long time surveillance (months)
Protocol Option:
• eDP1.5 Option:Support eDP1.5,Up to 5.4Gbps/per lane, 4 Lanes
• eMMC Option:Support eMMC 5.1 HS400 / HS200 / CMD Queue
• MIPI D-PHY 1.2 Option:Support D-PHY V1.2,Up to 2.0Gbps per lane,1 + 4 Lanes
• NAND Flash Option:Support ONFI 4.1 (NV-DDR3),Mode 8 / Toggle DDR 2.0~267MHz
• SD 3.0 (SDIO 3.0) Option:Support SD 3.0 SDR104 / SD6.0 Legacy mode SDR104, DDR200, Command Queue/ SDIO 3.0
• SD 4.1 (UHS-II) Option:Support UHS156,Up to 1.56Gbps per lane
• SGMII Option:Speed support 1000M, 100M, 10M
Support Logic Analyzer:
• 2.4GHz timing analysis
• 8-state flow chart bus triggers
• Bus decodes with waveforms
• Stacks with a DSO to form as an MSO
Option:
• LA:Support eMMC 5.1, NAND Flash, SD 3.0 (SDIO 3.0), Serial Flash (SPI NAND), SPI
• LVDS:Low-voltage differential signal measurement supporting logic signals
Protocol Analyzer
It is hardware decoding, may log protocol data very long time if without waveforms. Application timing: Preliminary protocol debug.
Protocol Analyzer | Protocol Logger | Protocol Monitor |
Show real-time protocol data. Application timing: massive protocol data with some idles in between. |
Like data logger, save massive data into SSD hard drive. Application timing: massive protocol data. |
Like dash cameras, record protocol data by the device’s memory only. Application timing: trigger event only happens in very long time. |
|
MIPI M-PHY UFS2.1 Option | eDP1.5 Option | eMMC Option | MIPI D-PHY 1.2 Option |
NAND Flash Option | SD 3.0 (SDIO 3.0) Option | SD 4.1 (UHS-II) Option | SGMII Option |