BusFinder Add-Ons

$18,200.00

Logic Analyzer, Protocol Analyzer, Simple DSO

Protocol: MIPI D-PHY

LA probe
eDP1.4a
MIPI D-PHY
SD4.1
SD3.0 / SDIO3.0
eMMC5.1
NAND Flash
SGMII
UFS2.1
Compare

visamasteramerican expressdiscovershopify pay
SKU: BF-MIPI-DPHY
Availability : In Stock Pre order Out of stock
Categories: BusFinder Series
Tags: BusFinder
Overview
  • LA-Pod Solution:
    Accessories Description 
    Solution LA

    1. LA08-tip: 8 Data Channel 

    2. LA09-tip: 8 Data Channel + 1 CLK Channel

    3. Operation Voltage: -1V~8V

    4. Timing Analysis: 2.4 GHz 


    Software:
    LA MODE


 

  • eMMC 5.1 Solution:
    Accessories Description
    Solution eMMc5.1

    1. LA04 (B)-tip: 4 Data Channel 

    2. eMMC-tip: 12 Data Channel + 2 Analog Channel

    3. Auto Data Phase Tuning

    4. 3 Pin Mode: CMD, CLK, D0


    Software: 

    1. Settings
    eMMC Settings 1
    2. Data Phase Tuning
    eMMC Settings 2
    3. Decode: 
    eMMC Settings 3


 

  • SD 3.0 (SDIO 3.0) Solution:
    Accessories Description
    Solution SD3.0

    1. LA04 (B)-tip: 4 Data Channel

    2. SD3.0(SDIO 3.0)-tip: 12 Data Channel + 2 Analog Channel

    3. Auto Data Phase Tuning

    4. 3 Pin Mode: CMD, CLK, D0


    Software: 


    1. Settings
    SD30 Settings 1
    2. Data Phase Tuning
    SD30 Settings 3
    3. Decode
    SD30 Settings 2


 

  • SD 4.1 (UHS II) Solution:
    Accessories  Description
    Solution SD4.1 uSD4.1

    1. LA04 (B)-tip: 4 Data Channel

    2. SD4.1 & uSD4.1-tip: 6-SE / 3-Diff / 2-Analog Channel
    (*SE=Single Ended, Diff=Differential Pair)
     


    Software:  

    1. Settings
    SD40 Settings 1
    2. Decode
    SD40 Settings 2


 

  • NAND Flash Solution:
    NAND Flash Solution Accessories Description
    Solution NAND

    1. LA08-tip: 8 Data Channel

    2. LA09-tip: 8 Data Channel + 1 CLK Channel

    3. NAND-tip: 4 Data Channel + 2 Analog

    4. Support IC Vendors: 
    Hynix, Intel Micron, Samsung, ST, Toshiba, Winbond, Macronix,
    Cypress(Spansion), ONFI, Dosilicon, ESMT, Zetta, GD
    ( *Customized Available )


    Software:  

    1. Settings
    NAND Settings 1NAND Settings 2
    2. Decode
    NAND Settings 3


 

  • SGMII Solution:
     SGMII Solution Accessories Description
    Solution SGMII

    1. Way Station: 2-Diff(TX / RX) + 1 Ref. CLK
    ( *Diff=Differential Pair )

    2. Support Ethernet Speed: 1Gbps, 100Mbps, 10Mbps

    3. Support MAC & PCS Decode

     


    Software:

    1. Settings
    SGMII Settings 1
    2. Decode
    SGMII Settings 2


 

  • D-PHY Solution:
    Accessories Description
    Solution DPHY

    1. MIPI CSI & DSI Decode

    2. Way Station: 5-Diff (CLK, D0, D1, D2, D3)
    ( *Diff=Differential Pair )

    3. Support D-PHY V1.2  
    (Up to 2.0Gbps per Lane,1+4 Lanes)

    4. DSI CSI Display: Includes RGB、YCbCr、RAW and
        Compressed Packet(DSC)

    5. Porch Statistics


    Software:

    1. Settings
    DSI CSI
    DSI Settings 1 CSI Settings 1

    2. Decode
    DSI Settings 4
    3. Image Recovery
    Image Porch 
    DSI Settings 2 DSI Settings 3



 

  • UFS2.1(BF7264B+ Only) Solution:
    Accessories Description
    Solution UFS2.1

    1. Way Station: 2 Lanes 4-Diff(TX0, TX1, RX0, RX1) 
    ( *Diff=Differential Pair )

    2. UFS-tip: 4 Data Channel + 2 Analog Channel

    3. Support UFS2.1 Gen-3: 5.8Gbps per Lane

    4. Unipro & UFS Decode

     


    Software:

    1. Settings
    UFS21 Settings 1
    2. Decode
    UFS21 Settings 2

 

Logic Analyzer Mode

Logic Analyzer (LA) Mode

  • Capture digital waveforms and support bus decodes. Able to stack with a DSO to form as an MSO.

  •  Provides multiple storage modes, users could select to have long time recording or precision acquisition.

    •  Long Time Record: Transitional Storage VS Compressed Storage

    For signal capture and analysis, usually require to record the signal for a long time. If the data is stored in a compressed way, it will cause your software to lag or even stop functioning when decompressing the data after it is sent back to the computer. Because PC memory size might insufficient for decompressed data size. To satisfy the requirement of smooth software operation and long-term recording without missing any data, the storage method adopted by the Acute analyzer is transitional storage rather than compression. After returning to the PC software, it doesn"t need to do the decompression. The decoded results can be displayed while the analysis is finished.


    Measurement

     

    More than 20 types of waveform measurements with customized threshold settings features, provides real-time update for vertical, time and channel to channel timing measurements with statistic features.
    Time:Frequency, Period, ±Duty, ±Period, Rise/Fall Time, Delay, Phase
    Vertical:VMax, VMin, VHigh, VLow, Vpp, VAmp, VMid, VMean, VRMS, ±Overshoot, Rise/Fall Preshoot
    Counter:Edge Count, ±Pulse Count
    Math:Add, Subtract, Multiple, Divide, XY, Absolute, Square Root, LogA, LnA, Exponential, Integral

     

    Digital Voltmeter, DVM
    Provides voltage root-mean-square, voltage average and frequency
    counter function for the selected channel.

    Measure 1 KHz, 2.5 Vpp square waveforms by the measurement function. Measure 1 KHz, 2.5 Vpp square waveforms by the DVM function.

    Multiple Windows Spectrum analysis (Fast Fourier transform, FFT)
    Multiple Window feature provides 4 display types (1x1, 2x1, 1x2, 2x2), which could displays 16 channels in maximum 4 different windows, provides clear waveform readability without lower the vertical resolution. Apply FFT to the selected channel.
       
    Protocol Analyzer Protocol Logger Protocol Monitor
    Show real-time protocol data. Like data logger, save massive data into SSD hard drive. Like dash cameras, record protocol data by the device’s memory only.
    Application timing: massive protocol data with some idles in between. Application timing: massive protocol data. Application timing: trigger event only happens in very long time.
      Protocol Analyzer Mode

      Protocol Analyzer (PA) Mode
      It is hardware decoding, may log protocol data very long time if without waveforms. Application timing: Preliminary protocol debug.

      Digital & Analog Signals From MSO and External DSO From Other Vendors
      MSO Enables Digital & Analog Channels (Using the same channels) *[1]: Decode & Digital Signals*[2]: MSO Analog Signals*[3]: External DSO Signals
      Stack With Other Vendors of Oscilloscope

      Flow chart bus triggers

      Power trigger for serial bus, 8-states flow chart setting with Counter/Timer

      Detail parameters for each states

      Analog waveform
      Input Sensitivity: 2mV/div to 10V/div; Max. Sampling Rate: 1GS/s @ 1Ch
      Can be used with High Voltage probe, Differential probe or Current probe.

      Digital waveform
      Operation Range: ±30V
      Max. Timing Analysis: 2GS/s @ 8Ch

      Additional Information

      What's Included
      Included Items:
      • Cables / Probes specific to the selected protocol -- see description above for details.

      Note: Requires a BusFinder to form a complete solution.

      Software & Support

      Manual:

      Acute BusFinder Manual

      Download

      Software:

      Acute USB 3.0 Driver

      Download

      Acute BusFinder Main Program

      Download

      System Requirements
      System Requirements:
      • USB 3.0 port
      • 8GB PC RAM (min), 16GB (recommended)
      Supported Operating Systems:
      • Windows 7/8/10/11 (64-bit)