-
LA-Pod Solution:
Accessories Description 1. LA08-tip: 8 Data Channel
2. LA09-tip: 8 Data Channel + 1 CLK Channel
3. Operation Voltage: -1V~8V
4. Timing Analysis: 2.4 GHz
Software:
-
eMMC 5.1 Solution:
Accessories Description 1. LA04 (B)-tip: 4 Data Channel
2. eMMC-tip: 12 Data Channel + 2 Analog Channel
3. Auto Data Phase Tuning
4. 3 Pin Mode: CMD, CLK, D0
Software:
1. Settings
2. Data Phase Tuning
3. Decode:
-
SD 3.0 (SDIO 3.0) Solution:
Accessories Description 1. LA04 (B)-tip: 4 Data Channel
2. SD3.0(SDIO 3.0)-tip: 12 Data Channel + 2 Analog Channel
3. Auto Data Phase Tuning
4. 3 Pin Mode: CMD, CLK, D0
Software:
1. Settings
2. Data Phase Tuning
3. Decode
-
SD 4.1 (UHS II) Solution:
Accessories Description 1. LA04 (B)-tip: 4 Data Channel
2. SD4.1 & uSD4.1-tip: 6-SE / 3-Diff / 2-Analog Channel
(*SE=Single Ended, Diff=Differential Pair)
Software:
1. Settings
2. Decode
-
NAND Flash Solution:
NAND Flash Solution Accessories Description 1. LA08-tip: 8 Data Channel
2. LA09-tip: 8 Data Channel + 1 CLK Channel
3. NAND-tip: 4 Data Channel + 2 Analog
4. Support IC Vendors:
Hynix, Intel Micron, Samsung, ST, Toshiba, Winbond, Macronix,
Cypress(Spansion), ONFI, Dosilicon, ESMT, Zetta, GD
( *Customized Available )
Software:
1. Settings
2. Decode
-
SGMII Solution:
SGMII Solution Accessories Description 1. Way Station: 2-Diff(TX / RX) + 1 Ref. CLK
( *Diff=Differential Pair )2. Support Ethernet Speed: 1Gbps, 100Mbps, 10Mbps
3. Support MAC & PCS Decode
Software:
1. Settings
2. Decode
-
D-PHY Solution:
Accessories Description 1. MIPI CSI & DSI Decode
2. Way Station: 5-Diff (CLK, D0, D1, D2, D3)
( *Diff=Differential Pair )3. Support D-PHY V1.2
(Up to 2.0Gbps per Lane,1+4 Lanes)4. DSI CSI Display: Includes RGB、YCbCr、RAW and
Compressed Packet(DSC)5. Porch Statistics
Software:
1. Settings
DSI CSI
2. Decode
3. Image Recovery
Image Porch
-
UFS2.1(BF7264B+ Only) Solution:
Accessories Description 1. Way Station: 2 Lanes 4-Diff(TX0, TX1, RX0, RX1)
( *Diff=Differential Pair )2. UFS-tip: 4 Data Channel + 2 Analog Channel
3. Support UFS2.1 Gen-3: 5.8Gbps per Lane
4. Unipro & UFS Decode
Software:
1. Settings
2. Decode
Logic Analyzer (LA) Mode
-
MSO analog and digital channels can capture signals simultaneously.
LA Storage Mode:
It can also stack an oscilloscope to compare digital and analog signals simultaneously, which is suitable for signal quality analysis.
Long Time Record: Transitional Storage VS Compressed Storage
For signal capture and analysis, usually require to record the signal for a long time. If the data is stored in a compressed way, it will cause your software to lag or even stop functioning when decompressing the data after it is sent back to the computer. Because PC memory size might insufficient for decompressed data size. To satisfy the requirement of smooth software operation and long-term recording without missing any data, the storage method adopted by the Acute analyzer is transitional storage rather than compression. After returning to the PC software, it doesn't need to do the decompression. The decoded results can be displayed while the analysis is finished.
Software Main Window
Analog & Digital waveform
Auto Threshold Settings:
1.
2.
3.
Trigger Settings Window
Multiple Protocols Analysis Simultaneously:
Ex: I2C + USB PD3.0
MSO Stack With Other Vendors of Oscilloscope:
(*Support DSO)
MSO Enables Digital & Analog Channels (Using the same channels)
Digital & Analog Signals From MSO and External DSO From Other Vendors*BUS_SMBUS: Decode & Digital Signals *DSO: MSO Analog Signals *Ext DSO: External DSO Signals
Add Notes & Pictures in Waveform
Power Management Protocols Solution for MSO
Ex: PMBus(CH0 & CH1) & The Related Power Voltage(CH2) (*Digital CH0, CH1 Analog: CH2 )
It is hardware decoding, may log protocol data very long time if without waveforms.
Application timing: Preliminary protocol debug.
PA Storage Mode:
Software Main Window:
Additional Information
Included Items:
- Cables / Probes specific to the selected protocol -- see description above for details.
Note: Requires a BusFinder to form a complete solution.
System Requirements:
- USB 3.0 port
- 8GB PC RAM (min), 16GB (recommended)
Supported Operating Systems:
- Windows 7/8/10/11 (64-bit)