100MHz Series Differential Probe
• USB 3.0 interface, 12V power adaptor
• Channels : 112 (Data Output), 16 (Event Input)
• Data rate : 700Mbps @Ch (Max.)
• Memory : 256Mb/ch
• Clock Range : 1Hz ~ 2.4GHz (6 digits)
• Probe output : 0.8V ~ 5.0V (0.1V resolution) and Hi-Z
• Phase tuning between channels
• Default pattern : I²C, MIPI I3C, MIPI RFFE, PMBus, PWM, SPI, Sync / Async-Counter, ...
• User pattern : Direct draw, Acute-LA / VCD, CSV (MIPI I3C, MIPI RFFE), ...
The 100MHz Series Differential Probe is a high-performance differential voltage measurement probe with a BNC interface, designed for easy connection to any oscilloscope with a corresponding interface. It is powered via USB, eliminating the need for an additional power supply. This probe is suitable for various electronic testing and measurement environments and allows users to safely measure differential voltages of up to ±700 V, ±1400 V, and ±3500 V.
In cases where your measurements exceed the linear range of the probe, the 100MHz Series Differential Probe provides visual and audible warning indicators to ensure that you promptly detect measurements exceeding the range. This helps prevent potential damage or hazards, contributing to the safety of your equipment and testing work.
Specifications are as follows:
• Powered by USB port (power bank)
• Bandwidth：100MHz
• Attenuation：10X / 100X ; 20X / 200X ; 50X / 500X
• Input Voltage : 700V ; 1400V ; 3500V
• Input Impedance：10Mohm, 1pF
| EC conformity： EN 61010-031:2002 +A1:2008 CAT II 600V, CAT III 300V |
|
| Power Source |
USB Port, Battery (AA / R6 / LR6) |
|---|---|
| Attenuation |
10X / 100X, 20X / 200X, 50X / 500X |
Additional Information
Included Items:
- DG4000 Main unit
- DG-Pod
- Event-Pod
- OE-Pod
- USB 3.0 Cable
- Flying Lead Cable
- BNC to MCX
- Grippers
- Adapter / Power cord
System Requirements:
- USB 3.0 port
- 8GB PC RAM (min), 16GB (recommended)
Supported Operating Systems:
- Windows 7/8/10/11 (64-bit)