LTPI Protocolos compatibles

Computadoras y servidores

Low Throughput Peripheral Interface

¿Qué es LTPI?

LTPI (Low Throughput Peripheral Interface) is an Intel-defined serial bus used for communication between a host processor or BMC and platform peripherals in server and computing platforms. LTPI provides a lightweight, low-pin-count alternative to eSPI for connecting peripherals that do not require high bandwidth, such as GPIO expanders, fan controllers, and basic I/O devices. The interface uses a synchronous clock and data pair, operating at speeds up to 24 MHz. Engineers working on Intel server platform bring-up and debug need LTPI decode capability to verify peripheral enumeration, command/response exchanges, and data transfers between the host and LTPI-attached devices.

LTPI Referencia rápida

type	Serial, synchronous
signals	CLK, DATA
max Speed	24 MHz
voltage Range	1.8V
features	Intel platform bus

Instrumentos Acute compatibles con LTPI

Serie TravelLogic

Serie LA4000

¿Listo para analizar este protocolo?

Vea cómo los instrumentos Acute capturan y decodifican este protocolo en tiempo real. Solicite una demo o contacte a nuestro equipo.

Solicitar una demo Ver productos compatibles

¿Cómo analizar LTPI con instrumentos Acute

Conecte su analizador lógico Acute a las lineas LTPI CLK y DATA en la placa de plataforma.

Conecte un cable de tierra a la referencia de tierra de la placa objetivo.

En el software Acute, seleccione el LTPI protocol decoder y asigne CLK y DATA a los canales de entrada correspondientes.

Configure el decodificador para expected bus speed and framing parameters.

Capture y visualice los LTPI transactions showing command types, register addresses, and data payloads.

Preguntas frecuentes

Que tasa de muestreo necesito para el análisis LTPI ?

LTPI operates at clock speeds up to 24 MHz. For reliable decoding, use a sample rate of at least 100 MHz (approximately 4x the clock frequency). A sample rate of 200 MHz or higher is recommended to clearly resolve clock-data relationships and accurately decode command and data phases.

Por que mi decodificador LTPI no reconoce las transacciones?

LTPI decode failures often result from incorrect voltage threshold settings — LTPI signals typically use 1.8V logic levels. Verify that the logic analyzer's input threshold is configured for 1.8V. Also check that both CLK and DATA connections are solid and that the probes are attached at the correct test points on the board. If the platform has not completed initialization, LTPI traffic may not yet be present.

Cuantos canales se necesitan para el análisis de LTPI ?

LTPI requires 2 channels — CLK and DATA. If you need to monitor additional sideband signals such as reset or interrupt lines, add one channel per signal. For platforms with multiple LTPI buses, allocate 2 channels per bus.

Protocolos relacionados

eSPI SMBus

¿Necesita ayuda para elegir el instrumento adecuado para su protocolo? Contacte a nuestro equipo de ingeniería.

Ver productos compatibles Contáctenos