PLDM Protocolos compatibles

Computadoras y servidores

Platform Level Data Model over MCTP

¿Qué es PLDM?

PLDM (Platform Level Data Model) is a DMTF specification that defines structured data formats and message commands for platform management functions transported over MCTP. PLDM covers sensor monitoring and events, firmware update, BIOS configuration, and Redfish Device Enablement (RDE). It provides the application-layer semantics that BMCs and managed devices use to exchange telemetry, perform firmware updates, and manage platform configuration. Engineers debugging server and data center platform management need PLDM decode to verify sensor readings, firmware update sequences, event handling, and configuration parameter exchanges between the BMC and managed components.

PLDM Referencia rápida

type Packet-based
signals MCTP transport
features DMTF platform management data model

Instrumentos Acute compatibles con PLDM

Serie TravelLogic

Serie TravelLogic
Serie LA4000

Serie LA4000

¿Listo para analizar este protocolo?

Vea cómo los instrumentos Acute capturan y decodifican este protocolo en tiempo real. Solicite una demo o contacte a nuestro equipo.

Solicitar una demo Ver productos compatibles

¿Cómo analizar PLDM con instrumentos Acute

1

Conecte su analizador lógico Acute a la interfaz de transporte MCTP que transporta trafico PLDM.

2

Conecte un cable de tierra a la referencia de tierra de la placa objetivo.

3

En el software Acute, seleccione el PLDM protocol decoder y asigne las señales de transporte a los canales de entrada correspondientes.

4

Configure el decodificador para MCTP transport binding and PLDM message type of interest.

5

Capture y visualice los PLDM messages showing command types, sensor readings, completion codes, and data payloads.

Preguntas frecuentes

Que tasa de muestreo se requiere para el análisis PLDM ?
PLDM is an application-layer protocol carried over MCTP, so the sample rate requirement is determined by the underlying transport. For SMBus MCTP, 2-4 MHz is sufficient. For Ethernet MCTP, match the PHY interface speed requirements. PLDM messages themselves are relatively infrequent, but firmware update transfers can be sustained, requiring adequate capture depth.
Por que mi actualizacion de firmware PLDM falla a mitad de la transferencia?
PLDM firmware update uses a multi-step sequence: RequestUpdate, GetPackageData, PassComponentTable, UpdateComponent, and ActivateFirmware. A failure mid-transfer often indicates a timeout, transfer error, or component table mismatch. Capture the MCTP bus during the firmware update to decode PLDM messages and identify which command received an error completion code and at what point in the sequence the failure occurred.
Cuantos canales se necesitan para el análisis de PLDM ?
Channel requirements are the same as for the underlying MCTP transport. For SMBus: 2 channels. For Ethernet: 6-12 channels depending on the interface. PLDM adds no additional physical signals beyond what MCTP and its transport require.

Protocolos relacionados

MCTP Control SPDM

¿Necesita ayuda para elegir el instrumento adecuado para su protocolo? Contacte a nuestro equipo de ingeniería.

Ver productos compatibles Contáctenos